Storage

Polyvinyl Alcohol (PVOH) Film is sensitive to temperature and relative humidity (RH). Users should monitor and control room conditions during storage and film conversion.

Polyvinyl Alcohol Films are sensitive to ambient temperature and relative humidity. The film should be stored in its original air-tight protective wrap. Ideal storage conditions are 5 – 25°C (41 – 77°F) and 20 – 50%RH. Temperature excursions above 40°C/104⁰F for long periods should be avoided. The film should be conditioned in the protective wrap at the temperature of the converting environment for 48 hours prior to use. For additional information, contact solubpack Technical Service.

If the film is not completely used during conversion, the film should be repackaged in the air tight moisture barrier wrapping (typically HDPE) and stored properly until resuming conversion.

Strong acid and strong base material may cause insoluble

If you want to use water-soluble film to pack special drugs and strong acid and alkali substances. please consult beforehand.

Don’t get wet

Please be careful not to touch the pvoh film with wet hands, sweat, saliva, water droplets, etc.Please take care it.

Don’t let the moisture in the air condense

Bring the water-soluble film from the cold warehouse to the warm workshop,If open the package immediately, the moisture in the air condenses on the film surface, which may be the cause of the problem. Please open the package after leaving it in the workshop for more than 48 hours.